 Fri Jun 16 09:37:55 2023, GC KHK GL, Runs, , General, First run with 62Ni on the target 
|
beam current 20 enA
charge state 17
energy is yet to be checked (tuned to 210 MeV of 58Ni, Alain has to recalculate and change to 230 MeV of 62Ni) |
|
Fri Jun 16 08:19:50 2023, GC KHK, Runs, , , test run
|
==> DAQ started at : 23-06-16 at 06h-13m-35s
==> Shell name : ./.user_start.sh &nbs |
|
Sat Jun 17 09:26:42 2023, GC KWL KHK, Runs, , General, run_6
|
DSSD:
CH0: 9.7 uA
CH2: 5.525 uA |
|
Sun Jun 25 20:42:19 2023, Desislava, AGBEKPONOU , Runs, , General, new run 78
|
start at 20:42, stop at 22:44
beam intensity: 23enA
rate to disk: 6.3 Mib/s |
|
Sun Jun 25 22:44:38 2023, Desislava, AGBEKPONOU , Runs, , General, new run 79
|
start at 22:45, stop at 2
beam intensity: 23enA, decreased to 15 enA. At 23:30 we managed to increase it to 20enA by changing the stripper foil
rate to disk: 6.2 Mib/s |
|
Thu Jun 22 20:08:46 2023, Desislava, Runs, , General, run_38
|
60Ni
15 enA, went as low as 7 and then was increased to 22 enA at 21:15
charge state 17 |
|
Thu Jun 22 22:08:59 2023, Desislava, Runs, , General, run_39
|
60Ni
22 enA, decrease to 15
At 23:20, before the operator is shanged, he increased the untenity again (to 28enA). |
|
Sat Jun 17 18:10:45 2023, DK, KS, KHK, Runs, , General, run_10
|
62Ni beam
ch0: 24.96V 11.05uA
ch2: 25.01V 6.05uA |
|
Sat Jun 17 19:22:42 2023, DK, KS, KHK, Runs, , General, run_11
|
62Ni beam
ch0: 24.96V 11.05uA
ch2: 25.01V 6.05uA |
|
Sat Jun 17 20:31:59 2023, DK, KS, KHK, Runs, , , run_12
|
Restarted the DAQ:
File name : run
Run number : 12 |
|
Sat Jun 17 20:42:04 2023, DK, KS, KHK, Problems, , tests, DSSD - channels S1 0-5 - efficiency drop
|
we reset the DAQ and did the module_restart with the card IP 192.168.3.78
no change
we restarted the HV DSSD - no change |
|
Sat Jun 17 20:56:44 2023, DK, KS, Runs, , General, run_14
|
Beam intensity started at 20 enA, went to 8.5 enA and keep decreasing (up to 3enA), wriging ~5.3 KiB/s
Intensity dropped to 3enA, Hakim came and increased it back to 20enA from subrun 24-25 onward.
==> DAQ started at : 23-06-17 at 21h-08m-29s |
|
Sat Jun 17 22:48:18 2023, DK, KS, Runs, , , run_15
|
Beam intensity - 5enA
ch0: 24.96V 10.94uA |
|
Sat Jun 17 11:42:55 2023, All, Runs, , General, run_7
|
=> DAQ started at : 23-06-17 at 12h-07m-51s
==> Shell name : ./.user_start.sh |
|
Sat Jun 17 16:04:34 2023, All, Runs, , General, run_9
|
62Ni beam
ch0: 24.96V 10.47uA
ch2: 25.01V 5.94uA |
|
Sun Jun 18 15:23:42 2023, All, Runs, , General, run_23 - first 60Ni on 197Au - tuning
|
| up to run 28 beam intensity of about 4.5 enA |
|
Sun Jun 18 19:24:19 2023, All, Other, , Other, change the foils every ~2 hours
|
PAY attention to the stripper foil.
If the beam intensity drops to 15 enA, check the stripper foil.
It should be ~5 enA after the target (the meter on the counter) |
|
Sun Jun 18 23:23:31 2023, All, Runs, , General, run 34
|
at 00:40 beam intensity dropped to ~ 9enA . We increased the beam intensity by changing a stripper foil which resulted in 40 enA (~ 250 c in strip 1
counter in DSSD) (KWL and JSP).
ch0: 24.96V 11.21uA |
|
Thu Jun 22 18:22:56 2023, ALL, Runs, , General, run_37
|
60Ni
17 enA
charge state 17 |
|
Sun Jun 25 18:32:55 2023, Waely, Runs, , General, new run 76
|
beam was found and is back....but 60Ni seems to not be there.....more like 58Ni....(red compared to blue)
I have called hakim back...who just left
start at 18:24 |
|