stop - the source is stopped - no beam
target position 6, 1.5 mg/cm2
data rate 5-6 MB/s
==> DAQ started at : 23-06-16 at 15h-04m-54s
==> Shell name : ./.user_start.sh
File name : run
Run number : 2
User commentary : 62Ni on 197Au, pos 6, E=220 MeV, I=17 enA after the beam refocus
Start time : 2023-06-16 15:04:09.405755
==> End of ./.user_start.sh
==> /data_nuball2/N-SI-137/run_2.setup has been written
==> DAQ stopped at : 23-06-16 at 15h-34m-44s
==> shell name : ./.user_stop_trunkv3.sh
User commentary :
Start time : 2023-06-16 15:04:49.327564
Stop time : 2023-06-16 15:34:46.844479
Run duration: 0:29:57.516915
DATA saved : 93558491
GROUP saved : 0 (0,00 %)
COUNTER saved : 4359728 (4,65 %)
QDC saved : 73458866 (78,51 %)
CRRC4 saved : 0 (0,00 %)
TRAPEZ saved : 15739897 (16,82 %)
SAMPLER saved : 0 (0,00 %)
QT2T saved : 0 (0,00 %)
SCALER saved : 0 (0,00 %)
ELECTROMETER saved : 0 (0,00 %)
MISSING TAG saved : 0 (0,00 %)
MISSED TAG saved : 0 (0,00 %)
OTHER saved : 0 (0,00 %)
DATA lost : 0 (0,00 %)
==> End of ./.user_stop_trunkv3.sh |
test_noDSSD_62Ni_197Au.fast - run with the FC on, good for background (the beam was on but not on the target)
test_withDSSD_62Ni_197Au.fast - 58Ni beam on the target, E~210, intensity ~20 enA
test_withDSSD_62Ni_197Au_2.fast - 58Ni beam on the target, E~210, intensity ~20 enA
test_withDSSD_62Ni_197Au_gamma_2.fast - 58Ni beam on the target, E~210, intensity ~20 enA (Run stopped because DAQ crashed)
test_withDSSD_62Ni_gamma_3.fast - 58Ni beam on the target, E~210, intensity ~20 enA (Run started after starting again DAQ)
test_beam_tune_58Ni_62Ni.fast - 60Ni beam on the target, E~210, intensity ~3 enA
|
beam current 20 enA
charge state 17
energy is yet to be checked (tuned to 210 MeV of 58Ni, Alain has to recalculate and change to 230 MeV of 62Ni)
data rate 7.6 MB/s
target position 6 - Au
==> DAQ started at : 23-06-16 at 09h-25m-01s
==> Shell name : ./.user_start.sh
File name : test_beam_tune_58Ni_62Ni_2
Run number : 0
User commentary : hoppefully 62Ni
Start time : 2023-06-16 09:24:29.048192
==> End of ./.user_start.sh |